this is the Eli HY 5 2 ferris wheels. It has nothing but a cable for an outer ring, and is rim driven. These pictures are a tiny bit out of date, but the ride hasn't changed much since then. As usual, the action will be written under each picture.
The eli hy 5 wheel alone
lights on
The seat racks
The seats are taken off and racked there
The wheel must be rotated to get to the next seat
All seats racked
Support plates are attached. (more for looks)
The blue led lights are turned off,
And the rims fold in. The first 2 stay half down
But the rest are folded all the way in and held down by wire
rims folding
The wheel is moved each time to get to the next section
The rims are folded 95%
Now the last 2 are folded in
Rims folded
Support plates are racked
Now a few sweeps are disconnected
A support wire is put in place to fold the sweeps in place (tower to tower, not sweep to sweep)
1 section of the star is folded in
And the wheel wire is disconnected.
The winch is connected to the last sweep.
The remaining seats are held upwards by wire (done 3 times during folding)
As the sweeps fold, the star folds with it.
As the winch lets out , the sweeps fold. Unlike some of my other wheels, this wheel folds one sweep after the other, stopping on for a few seconds to disconnect the sweeps. My others must stop to take off the outer rims or spacers. (see expo wheel or wisdom wheel)
Sweeps folding down
sweeps folding
The cable is supported by the A frame
The final sweep folding
The sweeps are folded, and held together by a pipe cleaner
The wind braces fold up at the last 25%, (1 on each side)
and fold into the base. Secured by a pipe cleaner.
The brace feet are folded in, 2 on each side.
The tower hinge is attached
braces lowered and detached
The tower and the wheel are now lowered
Lowered down and secured.
Now front braces are folded down,
And the A frame is folded togeather
The ride racked
Lights
off and done.
The real ride racked and up (up is below)
A website showing Self Design knex carnival rides. All rides are made from scratch, not from kits, and are all based on real midway rides. Rides light up, and can tear down like the real rides.
Shenandoah shows summary
This blog is a display for my projects. I make models of carnival rides out of knex and pipe cleaners and a few other items. They rack (tear down) like the real rides. If you are viewing this site for the first time let me give you a tour. Below are posts. If your new you might of missed some, so scroll threw and back to see other projects. To the right, is a tab that says pages. Click that and it will take you to a list of pages, including carnival terminology, and youtube, as well as a few others. Enjoy and comment. P.S. if you comment, don't ask me for, or leave any personal info. I ask that you address me as Shenandoah shows, or idog0698. Thank you.
-Shenandoah shows.
-Shenandoah shows.
No comments:
Post a Comment